HVDC Generator
HDCG I-1000kV/20mA HVDC Generator
Home > Systems > HVDC Test System > HVDC Generator

HDCG I-1000kV/20mA HVDC Generator

Lead time: 120 days

Mode: HDCG I-1000kV/20mA

Applied Standard: 
 IEC 61643-1 2011 Surge Protective Devices Connected to Low-voltage Power Distribution Systems-Part 1: Performance and Testing Methods
 IEC 61083-1 Instruments and Software Used for Measurement in High-voltage Impulse Tests-Part 1: Requirements for Instruments
 IEC 61083-2 Instruments and Software Used for Measurement in High-voltage and High-current Tests-Part 2: Requirements for Software for Tests with Impulse Voltages and Currents
 IEC 62475 High Current Test Techniques-Definitions and Requirements for Test Current and Measuring Systems

Technical Parameters:
Rated Voltage: 1000kV
Rated Current : 20mA
Ripple Factor: <1.5% (at 20mA resistance current)
Voltage stability : Test object’s volt. Drop <1% under resistive current
Stage: 3 stages voltage-multiplying Drop 400kV
Polarity reverse: Manual
HV silicon stack polarity reversing time: approx. 10minute

Main circuit structure, this system is designed as unilateral unsymmetrical single stage voltage-multiplying circuit, besides test transformer, voltage regulator, the filter capacitor, multivoltage capacitor, silicon rectify stack is placed separately on three basement. The resistance voltage divider and earthing switch has the same basement which equip universal wheel and lifting jack. We can customize movable and stable type. Manual polarity reverse. The top electrode (corona ring) is special designed for DC generator. See outside drawing. There is safety earthing system on the generator, which protects the safety of staff and equipment.

Principle Diagram: 

Where To Buy

Related Question