Mode: TYDZ 400/3.3kV/0~6.3kV
Single phase Frequency: 60Hz Rated Capacity: 400kVA
Voltage adjusting methods: electrical drive (DC motor adjusting )
Rated Input Voltage: 3.3kV Rated Output Current: 0~63.5A
Rated Input Current: 121.2A Aberration Ration of Waveform: ≤3%
Rated Output Voltage:0~6.3kV Starting Voltage ≤1%
Impedance voltage: ≤7% (adjusting in the range of 50% ~100%, impedance is linear )
Short-circuit ability: continuous discharge 8 cycles not causes any damage on the regulator winding.
Cooling: ONAN Working time: 1 hour on.
Over-load capability: 60min @120%rated current; 30min@140% rated current; 5min@160%rated current.
Note: include - magnetism oil surface indicator, servo motor driving device, position indicator with terminal contacts and protection contacts.
The symmetrical compensation and reversed polarity voltage regulation circuit is adopted so that output voltage of the regulator keeps smooth and linearity, and regulating speed can be set and to be very stable. The interlock between voltage regulator, control table and secondary switch are available.
HIMALAYAL provides innovative products that comprise high voltage test equipment, full-set high voltage test instruments, on-site test systems and on-line monitoring systems, and services regarding tests, diagnostics and asset monitoring for clients in power industry. We help to ensure safety and reliability in the power generation, transmission and distribution.