Standard D&L Calibrating
HSS-29 Standard Dielectric Loss Calibrating Device
Home > Instruments > Tan Delta Test System > Standard D&L Calibrating

HSS-29 Standard Dielectric Loss Calibrating Device

Lead time: 30 days

HSS-29 Standard Dielectric Loss Calibrating Device

Description:

The dielectric loss factor set is widely used so tests in which the HV electric bridge is used are increasing. For instance, use automatic test set to detect insulation performance of electric equipment (motor, transformer etc). However, some operators tend to doubt test results. At this time, the bridge should be sent to the organization for calibration. But it is hard to do that. Based on that situation, this dielectric loss factor test set was designed. This test set can be used as test object; test results are compared with the previous ones so that the reasons for data deviation are identified. Thanks to high stability and accuracy, the set is easy to use indoors and outdoors.

Equip 11 grade for capacitance & Tan Delta Bridge self calibrating:
Grade 1:  1x10-4
Grade 2:  2x10-4
Grade 3:  3x10-4
Grade 4:  4x10-4
Grade 5:  5x10-4
Grade 6:  6x10-4
Grade 7:  7x10-4
Grade 8:  8x10-4
Grade 9:  9x10-4
Grade 10:  1x10-3
Grade 11:  2x10-3
Grade 12:  3x10-3
Grade 13:  4x10-3
Grade 14:  5x10-3
Grade 15:  6x10-3
Grade 16:  7x10-3
Grade 17:  8x10-3
Grade 18:  9x10-3
Grade 19:  1x10-2
Grade 20:  2x10-2
Grade 21:  3x10-2
Grade 22:  4x10-2
Grade 23:  5x10-2
Grade 24:  6x10-2
Grade 25:  7x10-2
Grade 26:  8x10-2
Grade 27:  9x10-2
Grade 10:  0
Grade 11:  Gas Insulated Standard Capacitor 1x10-5
The Gas Insulated Standard Capacitor for the device is 50kV 100pF. (More requirement can be customized.)

HSS-29 Standard Dielectric Loss Calibrating Device HSS-29 Standard Dielectric Loss Calibrating Device

HSS-29 Standard Dielectric Loss Calibrating Device HSS-29 Standard Dielectric Loss Calibrating Device

Where To Buy

Related Photos

Related Products

Related Researches